NSN 5305-01-530-2396
High Torque Screw
Between 0.573 inches and 0.603 inches fastener length, pan no. 2 head style, between 0.357 inches and 0.373 inches head diameter, head height: 0.133 inches .
Manufacturer part number NAS5314E3-5 for national stock number 5305015302396.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-530-2396.
-
MPN or Model
NAS5314E3-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 0.573 inches and 0.603 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.357 inches and 0.373 inches -
Head Height
0.133 inches -
Spline Major Diameter
0.155 inches -
Grip Diameter
Between 0.189 inches and 0.190 inches -
Internal Drive Style
Torx -
Thread Diameter
0.190 inches -
Grip Length
0.312 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
3180 pounds per square inch -
Material
Stainless steel -
Material Specification
A286 assn standard single material response -
Surface Treatment
Passivate or cadmium -
Surface Treatment Specification
Ams-qq-p-35 federal specification single treatment response or ams-qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-581-5615 MPN 120-225-08-09Close Tolerance Screw
- 5305-01-627-3549 MPN JSFB34V3-12DMachine Screw
- 5305-01-627-5163 MPN JSFB34V6-11Machine Screw
- 5305-01-627-6975 MPN JSFB38-5-25DMachine Screw
- 5305-01-646-1343 MPN JSFB12E08-49Machine Screw
- 5305-01-646-1443 MPN JSFB16E3-1Close Tolerance Screw
- 5306-01-585-0046 MPN 20-106-04018LShear Bolt
- 5306-01-045-5559 MPN HP5507-4-27Shoulder Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
![Mechanic Bill explains High Torque Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-01-530-2396 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS5314E3-5 | Saturn Fasteners Inc |
NAS5314E3-5 | Heartland Precision Fasteners, Inc. |
NAS5314E3-5 | Sps Technologies, Llc |
NAS5314E3-5 | B & B Specialties Inc. |
NAS5314E3-5 | B & B Specialties, Inc |
NAS5314E3-5 | Sps Technologies, Llc |
NAS5314E3-5 | Sps Technologies, Llc |
120-259E3-5 | Bell Helicopter Textron Inc. |
NAS5314E3-5 | National Aerospace Standards |
NAS5314E3-5 | Wesco Aircraft Hardware Corp. |
Stock Check
![](/public/images/partscage_shelf3.png)