NSN 5305-01-530-2400
High Torque Screw
Between 0.636 inches and 0.666 inches fastener length, pan no. 2 head style, between 0.357 inches and 0.373 inches head diameter, head height: between 0.122 inches and 0.133 inches .
Manufacturer part number 120-259E3-6 for national stock number 5305015302400.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-530-2400.
-
MPN or Model
120-259E3-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 0.636 inches and 0.666 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.357 inches and 0.373 inches -
Head Height
Between 0.122 inches and 0.133 inches -
Spline Major Diameter
0.155 inches -
Grip Diameter
Between 0.189 inches and 0.190 inches -
Internal Drive Style
Torx -
Thread Diameter
0.190 inches -
Grip Length
0.375 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
3180 pounds per square inch -
Material
Stainless steel -
Material Specification
A286 assn standard single material response -
Surface Treatment
Passivate or cadmium -
Surface Treatment Specification
Ams-qq-p-35 federal specification single treatment response or ams-qq-p-416, type 2 class 2 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-338-2091 MPN 53B334-59Close Tolerance Screw
- 5305-00-915-4769 MPN AIC792-4-7Machine Screw
- 5305-00-929-6237 MPN 545964Machine Screw
- 5305-01-158-5367 MPN AIC940-5-8Machine Screw
- 5305-01-241-0759 MPN 3M925-17AClose Tolerance Screw
- 5305-01-381-2125 MPN AIC1701-3-11Close Tolerance Screw
- 5305-01-385-9817 MPN AIC1652-4-5AClose Tolerance Screw
- 5305-01-417-2490 MPN TX1026V-3-14Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-530-2400 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
120-259E3-6 | Bell Helicopter Textron Inc. |
NAS5314E3-6 | Bell Helicopter Textron Inc. |
NAS5314E3-6 | Sps Technologies, Llc |
NAS5314E3-6 | Arconic Global Fasteners & Rings, |
NAS5314E3-6 | Saturn Fasteners Inc |
NAS5314E3-6 | Heartland Precision Fasteners, Inc. |
NAS5314E3-6 | B & B Specialties Inc. |
NAS5314E3-6 | Sps Technologies, Llc |
NAS5314E3-6 | Sps Technologies, Llc |
NAS5314E3-6 | B & B Specialties, Inc |
NAS5314E3-6 | Lfc Industries Inc. |
NAS5314E3-6 | Sps Technologies, Llc |
NAS5314E3-6 | Pilgrim Screw Corporation |
NAS5314E3-6 | National Aerospace Standards |