NSN 5305-01-530-2413
High Torque Screw
Between 1.449 inches and 1.479 inches fastener length, flat countersunk head style, between 0.376 inches and 0.385 inches head diameter, spline major diameter: 0.155 inches .
Manufacturer part number 120-265E3P19 for national stock number 5305015302413.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-530-2413.
-
MPN or Model
120-265E3P19
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 1.449 inches and 1.479 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.376 inches and 0.385 inches -
Spline Major Diameter
0.155 inches -
Grip Diameter
Between 0.189 inches and 0.190 inches -
Internal Drive Style
Torx -
Thread Diameter
0.190 inches -
Grip Length
1.188 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
3180 pounds per square inch -
Countersink Angle
100.0 degrees -
Material
Stainless steel -
Material Specification
A286 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ams-qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-020-3782 MPN 205-072-215-1I Rescue Hoist Post
- 1560-00-121-1188 MPN 204-031-617-093Cabin Roof Structure Frame
- 1560-00-133-7323 MPN 204-030-647-013Door Stay Bracket
- 1560-00-153-3804 MPN 212-061-207-269Aircraft Frame
- 1560-00-163-1107 MPN 212-060-602-9Low Level Switch Support
- 1560-00-176-1504 MPN 209-030-822-13Tail Boom Support
- 1560-00-226-1779 MPN 204-060-671-3Pressure Transmitter Bracket
- 1560-00-228-3577 MPN 47-612-058-1Tr Bracket Assembly
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-530-2413 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
120-265E3P19 | Bell Helicopter Textron Inc. |