NSN 5305-01-532-7319
High Torque Screw
Between 0.261 inches and 0.291 inches fastener length, flat countersunk head style, between 0.376 inches and 0.385 inches head diameter, hole diameter: between 0.070 inches and 0.075 inches .
Manufacturer part number ST3M714-3D29 for national stock number 5305015327319.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-532-7319.
-
MPN or Model
ST3M714-3D29
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 0.261 inches and 0.291 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.376 inches and 0.385 inches -
Hole Diameter
Between 0.070 inches and 0.075 inches -
Grip Diameter
Between 0.189 inches and 0.190 inches -
Point Style
Flat -
Internal Drive Style
High-torque -
End Application
Probe assembly f/a-18e/f -
Thread Diameter
0.190 inches -
Grip Length
Between 0.860 inches and 0.890 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
100.0 degrees -
Material
Stainless steel -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-680-5889 MPN BACB30LU-4D-35Machine Screw
- 5305-01-021-3759 MPN BACB30LU4-3Close Tolerance Screw
- 5305-01-435-6482 MPN BACB30LU9-24Close Tolerance Screw
- 5305-01-513-9637 MPN ST3M557-4-5Close Tolerance Screw
- 5306-00-512-6420 MPN VEP220555-12-27Machine Bolt
- 5306-01-013-3992 MPN VAL23033-3-5Shear Bolt
- 5306-01-027-5249 MPN ST3M571-4-18Close Tolerance Bolt
- 5306-01-054-3427 MPN VCG0009L7-16Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-532-7319 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M714-3D29 | Boeing Company, The |
HT4049-3D29 | Arconic Global Fasteners & Rings, |
HT4049-3D29 | Huck International, Inc. |
HT4049-3D29 | Sps Technologies, Llc |
ST3M714-3D29 | Fastener Innovation Technology, Inc. |
WC4049-3D29 | West Coast Aerospace Inc |
HT4049-3D29 | Hi-shear Corporation |
HT4049-3D29 | Sps Technologies Ltd Tj Brooks |
HT4049-3D29 | Lisi Aerospace Canada Corp |
ST3M714-3D29 | Valley-todeco, Inc. |
HT4049-3D29 | Sps Technologies, Llc |
ST3M714-3D29 | Heartland Precision Fasteners, Inc. |
HT4049-3D29 | Sps Technologies, Llc |
HT4049-3D29 | Sps Technologies, Llc |
11931-3D29 | Reid Products Inc. |
HT4049-3D29 | Alcoa Global Fasteners, Inc. |
ST3M714-3D29 | Houston Precision Fasteners I, Lp |