NSN 5305-01-533-4909
High Torque Screw
Between 0.975 inches and 1.005 inches fastener length, flat countersunk head style, between 0.338 inches and 0.381 inches head diameter, grip diameter: between 0.187 inches and 0.188 inches .
Manufacturer part number NAS7203A10 for national stock number 5305015334909.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-533-4909.
-
MPN or Model
NAS7203A10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.365 inches -
Fastener Length
Between 0.975 inches and 1.005 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.338 inches and 0.381 inches -
Grip Diameter
Between 0.187 inches and 0.188 inches -
Internal Drive Style
Cross recess type ii -
End Application
C-135 aircraft -
Thread Diameter
0.190 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Bolt, 100degree hed, cruciform recess, close tolerance -
Material
Stainless steel -
Material Specification
Ams5731 assn standard single material response or ams5737 assn standard single material response -
Surface Treatment
Aluminum -
Surface Treatment Specification
Nas4006 national std/spec single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-382-2946 MPN NAS1063A16-3Terminal Board Marker Strip
- 5935-01-322-4929 MPN NAS820-32AElectrical Connector Cover
- 5305-00-058-4024 MPN MS24694S126Machine Screw
- 5305-00-064-4375 MPN NAS1506-16Close Tolerance Screw
- 5305-00-097-4441 MPN MS21125-419Close Tolerance Screw
- 5305-00-127-5684 MPN NAS1135V11Close Tolerance Screw
- 5305-00-186-9546 MPN NAS1351C06H5Socket Head Cap Screw
- 5305-00-205-3597 MPN MS51958-71BMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-533-4909 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7203A10 | National Aerospace Standards |