NSN 5305-01-535-1389
Tap Bolt
1.098 inches fastener length, hexagon head style, between 0.208 inches and 0.230 inches head height, width between flats: 0.545 inches .
Manufacturer part number 88-20260-43 for national stock number 5305015351389.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-01-535-1389.
-
MPN or Model
88-20260-43
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Direction
Right-hand -
Thread Length
0.880 inches -
Fastener Length
1.098 inches -
Head Style
Hexagon -
Head Height
Between 0.208 inches and 0.230 inches -
Width Between Flats
0.545 inches -
End Application
6115-01-471-7088 -
Thread Diameter
0.312 inches -
Hole Quantity
1 -
Thready Qty Per Inch (tpi)
15 -
Min. Tensile Strength (psi)
60000 pounds per square inch -
Hole Configuration Style
Hexagon flats -
Part Name Assigned By Controlling Agency
Hex washerhead -
Material
Stainless steel -
Material Specification
Ansi b18.6.3 national std/spec single material response -
Surface Treatment
Zinc -
Supplementary Features
Mrcs aatc jab0.624 and jac0.676; aatdjab0.035 and jac0.055 -
Thread Series Designator
Unc
More from these suppliers
- 5935-01-014-2278 MPN 88-21937Electrical Receptacle Connector Body
- 5930-01-223-6414 MPN 80-7414Rotary Switch
- 5935-01-014-4920 MPN 88-21947Electrical Connector Backshell
- 5305-01-006-2072 MPN B1821BH100F550NHexagon Head Cap Screw
- 5305-01-342-8564 MPN 0.500-13 UNC-2A X 1.375-NICUSocket Head Cap Screw
- 5305-01-421-4212 MPN B1821AH050C200NHexagon Head Cap Screw
- 5306-01-194-0589 MPN B1821BH038C425LMachine Bolt
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-01-535-1389 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
88-20260-43 | Department Of Defense Project |
B18.6.3 | American National Standards |
88-20260-43 | Department Of Defense Project |
B18.6.3 | American National Standards |
88-20260-43 | Department Of Defense Project |
B18.6.3 | American National Standards |