NSN 5305-01-536-0648
High Torque Screw
Between 1.203 inches and 1.233 inches fastener length, oval countersunk head style, 0.672 inches head diameter, grip diameter: 0.437 inches .
Manufacturer part number ST3M557-7-9M for national stock number 5305015360648.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-536-0648.
-
MPN or Model
ST3M557-7-9M
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.656 inches -
Fastener Length
Between 1.203 inches and 1.233 inches -
Head Style
Oval countersunk -
Head Diameter
0.672 inches -
Grip Diameter
0.437 inches -
Internal Drive Style
High-torque -
End Application
F-15e lh/rh av -
Thread Diameter
0.437 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Nickel alloy 718 -
Surface Treatment
Passivate and lubricant -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-516-6207 MPN 11907-5L15-1Close Tolerance Screw
- 5305-00-541-9344 MPN 11905-4DL14Close Tolerance Screw
- 5305-01-146-6143 MPN 11873-4-9-7Close Tolerance Screw
- 5305-01-239-0641 MPN 11879C6-10DShoulder Screw
- 5305-01-417-2490 MPN 11827V-3-14Close Tolerance Screw
- 5305-01-496-1423 MPN 11845C4-9AClose Tolerance Screw
- 5306-01-044-8529 MPN 11825-5D40Close Tolerance Bolt
- 5320-01-010-3783 MPN TL210-3-18Pin-rivet
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-536-0648 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M557-7-9M | Boeing Company, The |
11923-7-9M | Reid Products Inc. |