NSN 5305-01-537-1846
High Torque Screw
Drive style is: radial-slot recess/ fairchild aerospace, not listed this fiig. Bored hole, threaded end, 0.130 in dia, 0.620 in dp: wire form hold-out spring inserted; 2 lead thread..
Manufacturer part number CA21351-4-12RS for national stock number 5305015371846.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-537-1846.
-
MPN or Model
CA21351-4-12RS
-
Schedule B
7318.15.9000 (Threaded fasteners nesoi of iron or steel) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.567 inches and 0.706 inches -
Fastener Length
1.657 inches -
Head Style
Flat countersunk -
Head Diameter
0.435 inches -
Locking Feature
Detent ring locking feature -
Grip Diameter
0.249 inches -
Point Length
0.100 inches -
Point Diameter
Between 0.211 inches and 0.216 inches -
Single Shear Strength
4140 pounds per square inch -
Point Style
Chamfer dog -
End Application
F-22 raptor -
Thread Diameter
0.250 inches -
Grip Length
Between 0.851 inches and 0.990 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
2845 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 100.0 degrees -
Point Chamfer Angle
45.0 degrees -
Part Name Assigned By Controlling Agency
Stud bolt -
Material
Iron alloy 660 -
Material Specification
Ms5731 national std/spec single material response or ams5737 national std/spec 2nd material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Ams qq-p-35 national std/spec all treatment responses -
Supplementary Features
Stud bolts shall have polyproplene head protective ring installed for shipping, customer to remove ring before installing -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-416-9113 MPN CA29040-04-2-6PSpecial Screw
- 5305-00-536-6816 MPN CA2658-4-13Close Tolerance Screw
- 5305-01-197-3998 MPN CA2651-4-10Close Tolerance Screw
- 5305-01-272-9979 MPN CA30056-2-3-8-2Panel Screw Assembly
- 5305-01-531-1662 MPN CA2290-10-15-16Hexagon Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-537-1846 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CA21351-4-12RS | Arconic Global Fasteners & Rings, |