NSN 5305-01-537-4347
High Torque Screw
Drive style is: radial-slot recess/ fairchild aerospace, not listed this fiig. Bored hole, threaded end, 0.200 in dia, 0.800 in dp; wire form hold out spring inserted; 2 lead thread..
Manufacturer part number CA21369-6-16RS for national stock number 5305015374347.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-537-4347.
-
MPN or Model
CA21369-6-16RS
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.890 inches and 1.029 inches -
Fastener Length
2.260 inches -
Head Style
Flat countersunk -
Head Diameter
0.672 inches -
Locking Feature
Detent ring locking feature -
Grip Diameter
0.374 inches -
Point Length
0.100 inches -
Point Diameter
Between 0.330 inches and 0.335 inches -
Single Shear Strength
9400 pounds per square inch -
Point Style
Chamfer dog -
End Application
F-22 raptor -
Thread Diameter
0.375 inches -
Grip Length
Between 1.131 inches and 1.270 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
7360 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 100.0 degrees -
Point Chamfer Angle
45.0 degrees -
Part Name Assigned By Controlling Agency
Stud bolt -
Material
Iron alloy 660 -
Material Specification
Ams5731 national std/spec 1st material response or 5737 national std/spec 1st material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Ams qq-p-35 national std/spec all treatment responses -
Supplementary Features
Stud bolts shall have polyproplene head protective ring installed for shipping, customer to remove ring brfore installing -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-145-5319 MPN CA13000-10-11QCaptive Screw
- 5305-00-151-8642 MPN CA2630-04-9Close Tolerance Screw
- 5305-01-014-0172 MPN CA2109-2HSPanel Screw Assembly
- 5305-01-147-4031 MPN CA21094-3-4HSSocket Head Cap Screw
- 5305-01-161-2152 MPN CA13000-10-3-18QPanel Screw Assembly
- 5305-01-194-7054 MPN CA2193-3-10Close Tolerance Screw
- 5305-01-468-0003 MPN CA21063-06-6-9Panel Fastener Screw
- 5306-00-121-8851 MPN CA4510-4-26Close Tolerance Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-537-4347 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CA21369-6-16RS | Arconic Global Fasteners & Rings, |