NSN 5305-01-537-9700
High Torque Screw
Between 3.565 inches and 3.595 inches fastener length, flat countersunk head style, 0.951 inches head diameter, grip diameter: between 0.498 inches and 0.499 inches .
Manufacturer part number NAS1580V8T45 for national stock number 5305015379700.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-537-9700.
-
MPN or Model
NAS1580V8T45
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
NMF (National Motor Freight)
093483 - Bolts, Nuts Or Screws, NOI Iron Or -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.768 inches -
Fastener Length
Between 3.565 inches and 3.595 inches -
Head Style
Flat countersunk -
Head Diameter
0.951 inches -
Grip Diameter
Between 0.498 inches and 0.499 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
B1-b acft -
Thread Diameter
0.500 inches -
Grip Length
Between 2.802 inches and 2.822 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Bolt, flush head -
Material
Titanium alloy -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-435-3631 MPN NAS1063A10-105ATTerminal Board Marker Strip
- 5940-01-623-6190 MPN NAS1063C10-210GSectional Terminal Junction Block
- 5940-01-660-0092 MPN NAS1063Terminal Board Marker Strip
- 5940-01-451-4412 MPN NAS1063A3-504AHTerminal Board Marker Strip
- 5305-00-052-5941 MPN MS35198-83Machine Screw
- 5305-00-067-9912 MPN MS24667-17Socket Head Cap Screw
- 5305-00-081-6298 MPN NAS585-11Machine Screw
- 5305-00-108-9944 MPN NAS1352C03-5Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
![Mechanic Bill explains High Torque Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-01-537-9700 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580V8T45 | National Aerospace Standards |
Stock Check
![](/public/images/partscage_shelf3.png)