NSN 5305-01-538-8124
High Torque Screw
Between 2.386 inches and 2.416 inches fastener length, flat countersunk head style, 0.328 inches head diameter, grip diameter: between 0.188 inches and 0.189 inches .
Manufacturer part number LA-NAS1153-34 for national stock number 5305015388124.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-538-8124.
-
MPN or Model
LA-NAS1153-34
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093490 - Bolt/nut/screw/clips/fastener/etc -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 2.386 inches and 2.416 inches -
Head Style
Flat countersunk -
Head Diameter
0.328 inches -
Grip Diameter
Between 0.188 inches and 0.189 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
U-2 -
Thread Diameter
0.190 inches -
Grip Length
Between 2.115 inches and 2.135 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Screw -
Material
Steel comp 4140 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-534-5310 MPN LA-RE209-8RAircraft Torque Tube Assembly
- 1560-01-569-4762 MPN RR665-17Structural Bracket
- 1560-01-572-1477 MPN RX840-29Aircra Access Cover
- 1680-01-578-9774 MPN RX554-502Aircraft Installation And Equipment Kit
- 4920-01-583-6908 MPN RG35-8Aircraft Ma Fixture
- 5985-01-487-4984 MPN 5HF39600-105Antenna
- 4820-01-534-7685 MPN LA-2700SMS12Safety Relief Valve
- 5306-01-532-8362 MPN LA-AM2744E20DBolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-538-8124 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LA-NAS1153-34 | National Aerospace Standards |
LA-NAS1153-34 | Lockheed Martin Corporation |