NSN 5305-01-538-9370
High Torque Screw
Between 1.949 inches and 1.979 inches fastener length, pan head style, between 0.357 inches and 0.373 inches head diameter, head height: between 0.122 inches and 0.133 inches .
Manufacturer part number CA-NAS1133-27 for national stock number 5305015389370.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-538-9370.
-
MPN or Model
CA-NAS1133-27
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093490 - Bolt/nut/screw/clips/fastener/etc -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 1.949 inches and 1.979 inches -
Head Style
Pan -
Head Diameter
Between 0.357 inches and 0.373 inches -
Head Height
Between 0.122 inches and 0.133 inches -
Grip Diameter
0.331 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
U-2 -
Thread Diameter
0.190 inches -
Grip Length
Between 1.678 inches and 1.698 inches -
Thready Qty Per Inch (tpi)
32 -
Part Name Assigned By Controlling Agency
Screw -
Material
Steel comp 4140 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-531-9440 MPN LA-RF82-2Fitting-lwr Hatch
- 1560-01-532-8793 MPN LA-01-RM1696501000Backward Cap Kit
- 1560-01-574-0367 MPN RX1727-2Aircraft Structural Component Support
- 5306-01-531-8441 MPN LA-AM1724T7Bolt Pan Head Torq-
- 5940-00-549-8877 MPN NAS45-6-14CTerminal Board
- 1680-01-532-3062 MPN NAS77A6-020NAirc Sleeve Bushing
- 5305-00-051-4484 MPN MS51973-9Setscrew
- 5305-00-071-2096 MPN MS51958-87Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-538-9370 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CA-NAS1133-27 | National Aerospace Standards |
CA-NAS1133-27 | Lockheed Martin Corporation |