NSN 5305-01-538-9765
High Torque Screw
Between 1.485 inches and 1.515 inches fastener length, flat fillister head style, between 0.429 inches and 0.438 inches head diameter, head height: between 0.162 inches and 0.183 inches .
Manufacturer part number LA-NAS1125-18 for national stock number 5305015389765.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-538-9765.
-
MPN or Model
LA-NAS1125-18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093490 - Bolt/nut/screw/clips/fastener/etc -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.375 inches -
Fastener Length
Between 1.485 inches and 1.515 inches -
Head Style
Flat fillister -
Head Diameter
Between 0.429 inches and 0.438 inches -
Head Height
Between 0.162 inches and 0.183 inches -
Grip Diameter
0.312 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
U-2 -
Thread Diameter
0.312 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
24 -
Part Name Assigned By Controlling Agency
Screw -
Material
Steel comp 4140 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5935-01-531-9418 MPN LA-RF489-1Adapter-e8 Antenna
- 5975-01-569-4944 MPN RW309-14Electrical Bushing
- 5935-01-571-4703 MPN 1230721-1Connector Adapter
- 1560-01-572-1587 MPN RX1673-1Structural Support
- 5930-01-572-3713 MPN 3910A3Electronic Switch
- 1560-01-579-2512 MPN RG1071-1L Thermal Insulation
- 5975-01-581-2703 MPN RX1688-2Electrical Equ Rack
- 1560-01-590-9552 MPN RG932-30Structural Fitting
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-538-9765 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LA-NAS1125-18 | National Aerospace Standards |
LA-NAS1125-18 | Lockheed Martin Corporation |