NSN 5305-01-540-8208
High Torque Screw
160000 psi uts min. At room temperature heat treatment.
Manufacturer part number NAS1131E18 for national stock number 5305015408208.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-540-8208.
-
MPN or Model
NAS1131E18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.1380 inches -
Fastener Length
1.401 inches -
Head Height
0.055 inches -
End Application
C135f hercules aircraft -
Thready Qty Per Inch (tpi)
32 -
Part Name Assigned By Controlling Agency
Screw, machine pan head close tol, short thd, offset cruciform -
Material
Stainless steel -
Surface Treatment
Passivate -
Thread Series Designator
Unjc
More from these suppliers
- 1560-01-611-3884 MPN 63-1997-2Aircraft Structural Component Support
- 5935-01-322-4929 MPN NAS820-32AElectrical Connector Cover
- 5940-01-447-2944 MPN NAS1063A3-504ALTerminal Board Marker Strip
- 5305-00-007-6201 MPN NAS1102C04-9Machine Screw
- 5305-00-059-8229 MPN MS35214-4Machine Screw
- 5305-00-078-0177 MPN NAS1351-00LN6PSocket Head Cap Screw
- 5305-00-079-7977 MPN MS24694S195Machine Screw
- 5305-00-267-9679 MPN MS24693-S322Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-540-8208 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1131E18 | National Aerospace Standards |