NSN 5305-01-545-4602
High Torque Screw
Between 1.365 inches and 1.385 inches fastener length, flat countersunk head style, between 0.577 inches and 0.635 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number NAS2835C22T for national stock number 5305015454602.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-545-4602.
-
MPN or Model
NAS2835C22T
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.438 inches -
Fastener Length
Between 1.365 inches and 1.385 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.577 inches and 0.635 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.312 inches -
Grip Length
Between 1.797 inches and 1.827 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response or ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas2835 professional/industrial association standard
More from these suppliers
- 5935-00-520-8570 MPN NAS1641R12T12SNElectrical Receptacle Connector
- 5305-00-005-0631 MPN NAS1509-22Close Tolerance Screw
- 5305-00-052-8250 MPN NAS1351-08-8PSocket Head Cap Screw
- 5305-00-059-3658 MPN MS51958-62Machine Screw
- 5305-00-059-8255 MPN MS35214-30Machine Screw
- 5305-00-078-0177 MPN NAS1351-00LN6PSocket Head Cap Screw
- 5305-00-079-7965 MPN MS24694S214Machine Screw
- 5305-00-137-3092 MPN MS24674-30Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-545-4602 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS2835C22T | National Aerospace Standards |