NSN 5305-01-545-5791
High Torque Screw
0.526 inches fastener length, flat countersunk head style, between 0.253 inches and 0.261 inches head diameter, grip diameter: between 0.162 inches and 0.163 inches .
Manufacturer part number NAS1992T3T for national stock number 5305015455791.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-545-5791.
-
MPN or Model
NAS1992T3T
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.338 inches -
Fastener Length
0.526 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.253 inches and 0.261 inches -
Grip Diameter
Between 0.162 inches and 0.163 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.164 inches -
Grip Length
0.188 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Titanium alloy -
Material Specification
Ams 4971 assn standard single material response -
Thread Series Designator
Unjc -
Specification Data
80205-nas1992 professional/industrial association standard
More from these suppliers
- 5935-00-410-3995 MPN NAS1666-10Electrical Connector Backshell
- 5940-01-046-5338 MPN NAS1745-8Conductor Splice
- 5305-00-007-6182 MPN NAS1100E04-10PMachine Screw
- 5305-00-008-9119 MPN NAS1190E04T22LSocket Head Cap Screw
- 5305-00-021-3668 MPN MS35307-310Hexagon Head Cap Screw
- 5305-00-031-2387 MPN NAS1184-10Close Tolerance Screw
- 5305-00-043-2680 MPN MS24694S97Machine Screw
- 5305-00-052-7492 MPN MS24629-61Tapping Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-545-5791 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1992T3T | National Aerospace Standards |
Stock Check
- NE: 396
- NS: 21