NSN 5305-01-549-4439
High Torque Screw
2.042 inches fastener length, flat countersunk head style, 0.5066 inches head diameter, grip diameter: 0.250 inches .
Manufacturer part number NAS1580V4-T28 for national stock number 5305015494439.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-549-4439.
-
MPN or Model
NAS1580V4-T28
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.403 inches -
Fastener Length
2.042 inches -
Head Style
Flat countersunk -
Head Diameter
0.5066 inches -
Grip Diameter
0.250 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
1.750 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Titanium -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5935-00-180-2603 MPN NAS1650-106SNFElectrical Receptacle Connector
- 1680-00-340-0045 MPN NAS164Control Whee Insert
- 5940-01-135-7077 MPN AS1745-3Conductor Splice
- 5940-01-660-0092 MPN NAS1063A2-536GTerminal Board Marker Strip
- 5305-00-008-9058 MPN NAS1102E04-3PMachine Screw
- 5305-00-033-7683 MPN NAS1352C06-20Socket Head Cap Screw
- 5305-00-100-6589 MPN NAS1133E1Close Tolerance Screw
- 5305-00-205-3463 MPN NAS1351-4H10Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-549-4439 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580V4-T28 | National Aerospace Standards |