NSN 5305-01-549-4440
High Torque Screw
0.464 inches fastener length, pan head style, between 0.309 inches and 0.331 inches head diameter, head height: between 0.088 inches and 0.101 inches .
Manufacturer part number NAS1142E3P for national stock number 5305015494440.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-549-4440.
-
MPN or Model
NAS1142E3P
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
0.464 inches -
Head Style
Pan -
Head Diameter
Between 0.309 inches and 0.331 inches -
Head Height
Between 0.088 inches and 0.101 inches -
Grip Diameter
0.289 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.164 inches -
Grip Length
0.188 inches -
Thready Qty Per Inch (tpi)
32 -
Material
Stainless steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unjc -
Specification Data
80205-nas1142 professional/industrial association standard
More from these suppliers
- 5935-01-067-0916 MPN NAS1653R22B41PNElectrical Plug Connector
- 5935-01-323-4640 MPN MS33687-24-10PElectrical Connector Insert
- 5940-01-510-2783 MPN NAS1063C3Terminal Board Cover
- 5305-00-057-4373 MPN NAS1622-1Machine Screw
- 5305-00-058-9360 MPN MS51977-11Setscrew
- 5305-00-059-8445 MPN NAS1086V4Machine Screw
- 5305-00-067-9850 MPN MS24693-S122Machine Screw
- 5305-00-079-8474 MPN NAS1297-06-7Shoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-549-4440 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1142E3P | National Aerospace Standards |
Stock Check
- NS: 39
- NE: 1290