NSN 5305-01-551-0743
High Torque Screw
1.863 inches fastener length, fillister countersunk head style, 0.3813 inches head diameter, head height: 0.015 inches .
Manufacturer part number NAS1580C3T24P for national stock number 5305015510743.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-551-0743.
-
MPN or Model
NAS1580C3T24P
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
1.863 inches -
Head Style
Fillister countersunk -
Head Diameter
0.3813 inches -
Head Height
0.015 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.1900 inches -
Grip Length
Between 1.490 inches and 1.510 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
95000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Stainless steel -
Material Specification
Ams5731 assn standard single material response or ams5732 assn standard 1st material response or ams5737 assn standard 2nd material response or ams5853 assn standard 3rd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ams-qq-p-416, type ii, class 2 assn standard single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5945-01-265-0833 MPN 1159AV21308-5Electromagnetic Relay
- 1680-01-204-9250 MPN 1159H20029-12Aileron Actuator
- 5305-00-006-8141 MPN MS35275-259Machine Screw
- 5305-00-058-5087 MPN NAS608-3H12Socket Head Cap Screw
- 5305-00-065-7447 MPN NAS623-4-42Machine Screw
- 5305-00-150-9564 MPN NAS207-14Machine Screw
- 5305-00-225-6203 MPN MS24694A105Machine Screw
- 5305-00-237-6487 MPN NAS604-16PMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-551-0743 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580C3T24P | National Aerospace Standards |
NAS1580C3T24P | Gulfstream Aerospace Corporation |
NAS1580C3T24P | Gulfstream Aerospace Corporation |
NAS1580C3T24P | National Aerospace Standards |
NAS1580C3T24P | Gulfstream Aerospace Corporation |
NAS1580C3T24P | National Aerospace Standards |
NAS1580C3T24P | Gulfstream Aerospace Corporation |
NAS1580C3T24P | National Aerospace Standards |
NAS1580C3T24P | Gulfstream Aerospace Corporation |