NSN 5305-01-559-5228
Tap Bolt
Between 4.406 inches and 4.500 inches fastener length, between 0.272 inches and 0.291 inches head height, between 0.612 inches and 0.625 inches width between flats, thread diameter: 0.438 inches.
Manufacturer part number NASM35307-401 for national stock number 5305015595228.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-01-559-5228.
-
MPN or Model
NASM35307-401
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
1.125 inches -
Fastener Length
Between 4.406 inches and 4.500 inches -
Head Height
Between 0.272 inches and 0.291 inches -
Width Between Flats
Between 0.612 inches and 0.625 inches -
End Application
Navy codes 00243b390, 00243b391, 00243b392, 00243b394, 00243b395 -
Thread Diameter
0.438 inches -
Thready Qty Per Inch (tpi)
14 -
Min. Tensile Strength (psi)
80000 pounds per square inch -
Hardness Rating
80.0 rockwell b -
Material
Steel comp 304 or steel comp 304l or steel comp 305 or steel comp 316 or steel comp 316l or steel comp 384 or steel comp xm-7 -
Material Specification
Astm f593 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5940-01-413-3010 MPN NAS1063B249-258Terminal Board Marker Strip
- 4920-01-571-0093 MPN NAS1213R20K3 Strap Assembly-tie
- 5305-00-052-6456 MPN NAS1351C3-8Socket Head Cap Screw
- 5305-00-054-9251 MPN MS51045-29Setscrew
- 5305-00-059-4552 MPN MS35190-237Machine Screw
- 5305-00-104-2784 MPN MS21295-43Socket Head Cap Screw
- 5305-00-107-9228 MPN NASM24693CB1Machine Screw
- 5305-00-165-8025 MPN NAS1189-06P8Machine Screw
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-01-559-5228 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NASM35307-401 | National Aerospace Standards |
MS35307-401 | Military Standards |
Stock Check
- NE: 335