NSN 5305-01-559-7835
High Torque Screw
Between 0.598 inches and 0.628 inches fastener length, pan head style, between 0.205 inches and 0.219 inches head diameter, head height: between 0.070 inches and 0.080 inches .
Manufacturer part number NAS7700-6 for national stock number 5305015597835.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-559-7835.
-
MPN or Model
NAS7700-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.238 inches -
Fastener Length
Between 0.598 inches and 0.628 inches -
Head Style
Pan -
Head Diameter
Between 0.205 inches and 0.219 inches -
Head Height
Between 0.070 inches and 0.080 inches -
Grip Diameter
Between 0.111 inches and 0.112 inches -
Internal Drive Style
Cross recess type 1 -
End Application
C-130 amp cmb -
Thread Diameter
0.112 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
40 -
Material
Steel comp 8740 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjc
More from these suppliers
- 5940-01-238-6688 MPN NAS1389-11Conductor Splice
- 5940-01-384-3975 MPN NAS1063B3-3Terminal Board Marker Strip
- 5935-01-406-9472 MPN NAS1653-12B10SNElectrical Plug Connector
- 5940-01-432-3257 MPN NAS1063A10-105AYTerminal Board Marker Strip
- 5940-01-384-3975 MPN NAS1063B3-3Terminal Board Marker Strip
- 5305-00-003-6823 MPN NAS6002U24Machine Screw
- 5305-00-007-1566 MPN NAS1743C4T10USocket Head Cap Screw
- 5305-00-008-5896 MPN NAS1102C5-10Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-559-7835 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7700-6 | National Aerospace Standards |