NSN 5305-01-560-1093
High Torque Screw
1.531 inches fastener length, flat countersunk head style, 0.477 inches head diameter, grip diameter: 0.312 inches .
Manufacturer part number HT4069-5-16A for national stock number 5305015601093.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-560-1093.
-
MPN or Model
HT4069-5-16A
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.531 inches -
Fastener Length
1.531 inches -
Head Style
Flat countersunk -
Head Diameter
0.477 inches -
Grip Diameter
0.312 inches -
Internal Drive Style
High-torque -
End Application
F-15 aircraft -
Thread Diameter
0.312 inches -
Grip Length
1.000 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
100.0 degrees -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Aluminum -
Surface Treatment Specification
Mil-dtl-83488 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-539-4071 MPN 3M927-5L8Close Tolerance Screw
- 1680-01-562-2587 MPN 100-161-5-6Pin-rivet
- 5305-00-001-4897 MPN 68069-08-6DSocket Head Cap Screw
- 5305-00-114-2025 MPN NAS1221-3-3PMachine Screw
- 5305-00-510-5288 MPN LS15263V06-5Machine Screw
- 5305-00-541-9288 MPN 106706T8-15Close Tolerance Screw
- 5305-00-702-1637 MPN NAS1190-06P4Socket Head Cap Screw
- 5305-00-764-0902 MPN 54266-7-16Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-560-1093 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4069-5-16A | Sps Technologies, Llc |
HT4069-5-16A | Hi-shear Corporation |
HT4069-5-16A | Lisi Aerospace Canada Corp |
3M927-5L16 | Fastener Innovation Technology, Inc. |
3M927-5L16 | Twist Tite Mfg, Inc |