NSN 5305-01-560-4788
High Torque Screw
Between 0.348 inches and 0.378 inches fastener length, pan head style, between 0.205 inches and 0.219 inches head diameter, head height: between 0.070 inches and 0.080 inches .
Manufacturer part number NAS7700-2 for national stock number 5305015604788.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-560-4788.
-
MPN or Model
NAS7700-2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.238 inches -
Fastener Length
Between 0.348 inches and 0.378 inches -
Head Style
Pan -
Head Diameter
Between 0.205 inches and 0.219 inches -
Head Height
Between 0.070 inches and 0.080 inches -
Grip Diameter
Between 0.110 inches and 0.111 inches -
Internal Drive Style
Cross recess type 1 -
End Application
C130 aircraft -
Thread Diameter
0.112 inches -
Grip Length
Between 0.115 inches and 0.135 inches -
Thready Qty Per Inch (tpi)
40 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 8740 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 ty2 cl2 federal specification single treatment response -
Thread Series Designator
Unjc
More from these suppliers
- 5940-01-384-3987 MPN NAS1063A2TB107ADTerminal Board Marker Strip
- 5305-00-043-2681 MPN MS24694S96Machine Screw
- 5305-00-052-5921 MPN MS35198-66Machine Screw
- 5305-00-054-6869 MPN MS51031-48Setscrew
- 5305-00-145-0830 MPN NAS1635-08-9Machine Screw
- 5305-00-211-9411 MPN NAS1205-32DClose Tolerance Screw
- 5305-00-225-8477 MPN MS24693-S146Machine Screw
- 5305-00-285-2641 MPN NAS387-1032-5Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-560-4788 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7700-2 | National Aerospace Standards |