NSN 5305-01-561-5064
High Torque Screw
0.675 inches fastener length, flat countersunk head style, 0.381 inches head diameter, grip diameter: 0.189 inches .
Manufacturer part number NAS1580V3T5X for national stock number 5305015615064.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-561-5064.
-
MPN or Model
NAS1580V3T5X
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
0.675 inches -
Head Style
Flat countersunk -
Head Diameter
0.381 inches -
Grip Diameter
0.189 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
B2-bomber -
Thread Diameter
0.204 inches -
Grip Length
0.312 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Titanium -
Material Specification
Ams 4928 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-034-1601 MPN HT239PB3-41DClose Tolerance Screw
- 5305-00-255-5517 MPN NAS1101-08-18Machine Screw
- 5305-00-512-5263 MPN LS15235C6-19DClose Tolerance Screw
- 5305-00-680-5468 MPN HT4M-25Close Tolerance Screw
- 5305-00-834-0129 MPN 53B333-3Machine Screw
- 5305-01-014-6151 MPN S5008-3-7Close Tolerance Screw
- 5305-01-042-4439 MPN HT193LB3-18Close Tolerance Screw
- 5305-01-043-0014 MPN HT239PB-5-18Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-561-5064 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580V3T5X | Hi-shear Corporation |
NAS1580V3T5X | Lisi Aerospace Canada Corp |