NSN 5305-01-571-8597
High Torque Screw
Smoothness critical item when installed.
Manufacturer part number CB9350-4-8C for national stock number 5305015718597.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-571-8597.
-
MPN or Model
CB9350-4-8C
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
0.925 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Spline Major Diameter
Between 0.173 inches and 0.183 inches -
Grip Diameter
0.249 inches -
Internal Drive Style
Torx -
End Application
B-2 bomber -
Thread Diameter
0.250 inches -
Grip Length
0.500 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
100.0 degrees -
Criticality Code Justification
Feat -
Color
Gray top of head -
Material
Titanium alloy uns r56400 -
Material Specification
Ams4928 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-01-347-9887 MPN 05A107T9B98SElectrical Plug Connector
- 5935-01-352-3459 MPN 05A211-1Electrical Connector Cover
- 5935-01-381-8418 MPN 05A091S5A08CElectrical Connector Backshell
- 4920-01-387-2334 MPN DAA7229D146-001Travel Limiter
- 1560-01-398-9112 MPN DAA3150A698-042Aircraft Access Cover
- 5935-01-440-5174 MPN 05A092S12115CElectrical Connector Backshell
- 5935-01-543-0149 MPN 05A092S12507CElectrical Connector Backshell
- 1560-01-607-8248 MPN MS-182Flu Conductive Tape
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-571-8597 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CB9350-4-8C | Click Bond, Inc. |
03A519-4-8C | Northrop Grumman Systems Corporation |
03A519-4-8C | Northrop Grumman Systems Corporation |
CB9350-4-8C | Click Bond, Inc. |
03A519-4-8C | Northrop Grumman Systems Corporation |
CB9350-4-8C | Click Bond, Inc. |
03A519-4-8C | Northrop Grumman Systems Corporation |
CB9350-4-8C | Click Bond, Inc. |
03A519-4-8C | Northrop Grumman Systems Corporation |
CB9350-4-8C | Click Bond, Inc. |
03A519-4-8C | Northrop Grumman Systems Corporation |
CB9350-4-8C | Click Bond, Inc. |
03A519-4-8C | Northrop Grumman Systems Corporation |
CB9350-4-8C | Click Bond, Inc. |
03A519-4-8C | Northrop Grumman Systems Corporation |
CB9350-4-8C | Click Bond, Inc. |