NSN 5305-01-572-5730
High Torque Screw
0.714 inches fastener length, pan head style, between 0.256 inches and 0.270 inches head diameter, head height: between 0.087 inches and 0.097 inches .
Manufacturer part number NAS7801-7 for national stock number 5305015725730.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-572-5730.
-
MPN or Model
NAS7801-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
0.714 inches -
Head Style
Pan -
Head Diameter
Between 0.256 inches and 0.270 inches -
Head Height
Between 0.087 inches and 0.097 inches -
Grip Diameter
Between 0.1370 inches and 0.1375 inches -
Point Diameter
Between 0.1315 inches and 0.1340 inches -
Point Style
Flat -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.137 inches -
Grip Length
0.438 inches -
Thready Qty Per Inch (tpi)
32 -
Material
Iron alloy 660 -
Material Specification
Ams 5371 assn standard single material response or ams 5732 assn standard single material response or ams 5737 assn standard single material response or ams 5853 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-007-9898 MPN NAS1102E06-6PMachine Screw
- 5305-00-051-6112 MPN NAS517-8-12Machine Screw
- 5305-00-138-4273 MPN MS21262-17Socket Head Cap Screw
- 5305-00-151-2526 MPN NASM24694-S285Machine Screw
- 5305-00-185-0722 MPN NAS1352-6-28Socket Head Cap Screw
- 5305-00-206-2507 MPN MS35215-56Machine Screw
- 5305-00-207-1789 MPN NAS517-3-14Machine Screw
- 5305-00-225-4588 MPN MS24694A50Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-572-5730 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7801-7 | National Aerospace Standards |