NSN 5305-01-576-2865
High Torque Screw
0.838 inches fastener length, flat countersunk head style, 0.339 mils and 0.381 centimeters head diameter, grip diameter: 0.189 inches.
Manufacturer part number NAS1790C-3R8 for national stock number 5305015762865.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-576-2865.
-
MPN or Model
NAS1790C-3R8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.338 inches -
Fastener Length
0.838 inches -
Head Style
Flat countersunk -
Head Diameter
0.339 mils and 0.381 centimeters -
Grip Diameter
0.189 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
0.500 inches -
Hole Quantity
1 -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 90.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Bolt, 100 degree flush head -
Material
Stainless steel -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-111-1891 MPN NAS1665-14Electrical Connector Backshell
- 1560-01-570-3546 MPN N27200339-001Aircraft Former
- 1560-01-623-1916 MPN 520-14948-1Aircraft Stringer
- 5305-00-050-4219 MPN MS21295-27Socket Head Cap Screw
- 5305-00-058-4011 MPN MS24694S105Machine Screw
- 5305-00-058-7609 MPN MS24694S129Machine Screw
- 5305-00-059-8515 MPN NAS1351-04-4Socket Head Cap Screw
- 5305-00-068-5400 MPN MS24667-22Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-576-2865 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1790C-3R8 | National Aerospace Standards |
Stock Check
- NE: 4949