NSN 5305-01-576-4089
High Torque Screw
2.588 inches fastener length, flat countersunk head style, between 0.297 inches and 0.305 inches head diameter, grip diameter: 0.244 inches.
Manufacturer part number NAS1993C36T for national stock number 5305015764089.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-576-4089.
-
MPN or Model
NAS1993C36T
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.338 inches -
Fastener Length
2.588 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.297 inches and 0.305 inches -
Grip Diameter
0.244 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
Nimrod mra4; nimrod 2000 -
Thread Diameter
0.190 inches -
Grip Length
2.250 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
108000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Bolt, flat, 100 degree reduced head, torq-set and hi-torque, 108 ksi shear -
Material
Stainless steel -
Material Specification
Ams 5731 or ams 5737, a0286 (566286) except heat treat to 180 ksi min assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-348-8237 MPN NAS1063A-20Terminal Board
- 5940-01-372-2503 MPN NAS1063B-61-80Terminal Board Marker Strip
- 5940-01-612-8083 MPN NAS1063-C3-291ATerminal Board Marker Strip
- 5930-01-622-7018 MPN MS24655-135Toggle Switch
- 5305-00-034-1388 MPN NAS1624C6Machine Screw
- 5305-00-070-3275 MPN NAS1153C12Close Tolerance Screw
- 5305-00-100-6576 MPN MS21125B0419Close Tolerance Screw
- 5305-00-104-5098 MPN NAS1635-3LE6Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-576-4089 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1993C36T | National Aerospace Standards |