NSN 5305-01-580-0802
High Torque Screw
Between 0.750 inches and 0.752 inches fastener length, flat chamfer head style, 0.375 inches head diameter, head height: 0.188 inches .
Manufacturer part number 91829A537 for national stock number 5305015800802.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-580-0802.
-
MPN or Model
91829A537
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.250 inches -
Fastener Length
Between 0.750 inches and 0.752 inches -
Head Style
Flat chamfer -
Head Diameter
0.375 inches -
Head Height
0.188 inches -
Grip Diameter
0.250 inches -
Internal Drive Style
Four spanner -
End Application
Mq-9 -
Thread Diameter
0.190 inches -
Grip Length
Between 0.500 inches and 0.502 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
70000 pounds per square inch -
Hardness Rating
55.0 rockwell b -
Part Name Assigned By Controlling Agency
Tight-tolerance shoulder screw -
Material
Steel comp 302 or steel comp 303 or steel comp 303se or steel comp 316 -
Thread Series Designator
Unjf
More from these suppliers
- 4920-01-608-0868 MPN A627Tube Assy Flash
- 1560-01-617-5642 MPN UPB22143-2-SSynthetic Spares Wi
- 1560-01-659-4937 MPN UWA22067-4Aircraft Structural Panel
- 1560-01-666-5461 MPN UWA14295-1Aircraft Pylon
- 4820-01-019-8943 MPN 4701K31 200 PSISafety Relief Valve
- 5935-01-185-5819 MPN 7196K21Electrical Plug Connector
- 5930-01-432-4117 MPN 46025K68Pressure Switch
- 4820-01-481-4337 MPN 47245K53Check Valve
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-580-0802 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
91829A537 | Mcmaster-carr Supply Company |
P04391 | General Atomics Aeronautical |
P04391 | General Atomics Aeronautical |
91829A537 | Mcmaster-carr Supply Company |
P04391 | General Atomics Aeronautical |
91829A537 | Mcmaster-carr Supply Company |
P04391 | General Atomics Aeronautical |
91829A537 | Mcmaster-carr Supply Company |
P04391 | General Atomics Aeronautical |
91829A537 | Mcmaster-carr Supply Company |
P04391 | General Atomics Aeronautical |
91829A537 | Mcmaster-carr Supply Company |
P04391 | General Atomics Aeronautical |
91829A537 | Mcmaster-carr Supply Company |
P04391 | General Atomics Aeronautical |
91829A537 | Mcmaster-carr Supply Company |