NSN 5305-01-582-5443
High Torque Screw
0.838 inches fastener length, flat countersunk head style, between 0.328 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number NAS1153E9A for national stock number 5305015825443.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-582-5443.
-
MPN or Model
NAS1153E9A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
0.838 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.328 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.080 inches first hole -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.190 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.696 inches first hole and 0.736 inches first hole -
Material
Stainless steel -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-418-3341 MPN NAS1063D-1-6Terminal Board Marker Strip
- 5940-01-425-6038 MPN NAS1063A5-433Terminal Board Marker Strip
- 5940-01-429-9493 MPN NAS1063A13-TBN1002Terminal Board Marker Strip
- 5940-01-010-1572 MPN NAS1745-16Conductor Splice
- 5940-01-384-3971 MPN NAS1063D2-2Terminal Board Marker Strip
- 5940-01-658-0448 MPN NAS1063C3-300ATerminal Board Marker Strip
- 5305-00-008-5896 MPN NAS1102E5-10Machine Screw
- 5305-00-088-0361 MPN NAS623-2-38Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-582-5443 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1153E9A | Boeing Defence Australia |
NAS1153E9A | National Aerospace Standards |