NSN 5305-01-585-4560
High Torque Screw
Between 1.441 inches and 1.471 inches fastener length, flat countersunk head style, between 0.6901 inches and 0.7611 inches head diameter, grip diameter: between 0.4985 inches and 0.4995 inches .
Manufacturer part number NAS1581F8T11 for national stock number 5305015854560.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-585-4560.
-
MPN or Model
NAS1581F8T11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.763 inches and 0.773 inches -
Fastener Length
Between 1.441 inches and 1.471 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.6901 inches and 0.7611 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.500 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Bolt, shear, 100 degree flush reduced head, offset cruciform, 95 ksi fsu -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1581 professional/industrial association standard
More from these suppliers
- 5940-00-432-7375 MPN NAS1746-1Conductor Splice
- 5940-01-425-7402 MPN NAS1063C8-305Terminal Board Marker Strip
- 5940-01-443-8870 MPN NAS1063A4-138ADTerminal Board Marker Strip
- 5930-00-964-4485 MPN NAS1072-2Switch Guard
- 5305-00-007-1558 MPN NAS1100C04-14PMachine Screw
- 5305-00-007-3010 MPN NAS1100C08-6PMachine Screw
- 5305-00-007-9894 MPN NAS1102C04-10PMachine Screw
- 5305-00-021-4078 MPN NAS1221-3-3Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-585-4560 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581F8T11 | National Aerospace Standards |