NSN 5305-01-585-5593
High Torque Screw
Between 0.663 inches and 0.693 inches fastener length, flat countersunk head style, between 0.338 inches and 0.381 inches head diameter, grip diameter: between 0.188 inches and 0.189 inches .
Manufacturer part number NAS7103-5 for national stock number 5305015855593.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-585-5593.
-
MPN or Model
NAS7103-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.365 inches -
Fastener Length
Between 0.663 inches and 0.693 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.338 inches and 0.381 inches -
Grip Diameter
Between 0.188 inches and 0.189 inches -
Internal Drive Style
Cross recess type 1 -
End Application
1560-01-584-7732 -
Thread Diameter
0.190 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Bolt 100 degree head cruciform recess, close tolerance alloy steel long thread self locking and non locking -
Material
Steel comp 4340 or steel comp 8740 -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-465-6149 MPN NAS1745-9Conductor Splice
- 1680-01-524-1333 MPN NAS1375A04SB04Aircr Air Duct Hose
- 5940-01-384-3955 MPN NAS1063A20TB42CTerminal Board Marker Strip
- 5305-00-042-6425 MPN MS24667-25Socket Head Cap Screw
- 5305-00-058-9388 MPN MS51977-73Setscrew
- 5305-00-205-3844 MPN NAS1218-3-9Machine Screw
- 5305-00-210-5916 MPN NAS1218-3-11Machine Screw
- 5305-00-283-4669 MPN NAS1218-3-23PMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-585-5593 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7103-5 | National Aerospace Standards |