NSN 5305-01-585-8065
High Torque Screw
Between 1.037 inches and 1.081 inches fastener length, modified pan head style, between 0.309 inches and 0.331 inches head diameter, head height: between 0.088 inches and 0.102 inches .
Manufacturer part number NAS1142E11 for national stock number 5305015858065.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-585-8065.
-
MPN or Model
NAS1142E11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 1.037 inches and 1.081 inches -
Head Style
Modified pan -
Head Diameter
Between 0.309 inches and 0.331 inches -
Head Height
Between 0.088 inches and 0.102 inches -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.164 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Stainless steel -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjc -
Specification Data
80205-nas1142 professional/industrial association standard
More from these suppliers
- 5975-01-149-8889 MPN NAS1544-2A1Electrical Wall Plate
- 5940-01-348-5473 MPN NAS1063C12-3Terminal Board
- 5940-01-425-6516 MPN NAS1063A5-449Terminal Board Marker Strip
- 5935-00-111-1892 MPN NAS1665-16Electrical Connector Backshell
- 5305-00-008-5888 MPN NAS1102E06-12PMachine Screw
- 5305-00-116-1468 MPN NASM 7839Machine Screw
- 5305-00-144-4164 MPN MS27039DD1-35Machine Screw
- 5305-00-146-7173 MPN NAS1101-3H40Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-585-8065 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1142E11 | National Aerospace Standards |