NSN 5305-01-586-1952
High Torque Screw
Between 1.489 inches and 1.519 inches fastener length, flat chamfer head style, between 0.365 inches and 0.375 inches head diameter, head height: between 0.133 inches and 0.150 inches .
Manufacturer part number NAS1124V19 for national stock number 5305015861952.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-586-1952.
-
MPN or Model
NAS1124V19
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.316 inches -
Fastener Length
Between 1.489 inches and 1.519 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.365 inches and 0.375 inches -
Head Height
Between 0.133 inches and 0.150 inches -
Grip Diameter
Between 0.2481 inches and 0.2487 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 1.178 inches and 1.198 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy uns r56400 -
Material Specification
Ams 4967 assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1124 professional/industrial association standard
More from these suppliers
- 5940-01-303-7067 MPN NAS1747-11Conductor Splice
- 5940-01-413-3004 MPN NAS1063B149-165Terminal Board Marker Strip
- 5305-00-004-3129 MPN NAS1190C04P15LSocket Head Cap Screw
- 5305-00-005-0654 MPN NAS1151E1Close Tolerance Screw
- 5305-00-007-6186 MPN NAS1100C08-22Machine Screw
- 5305-00-052-9048 MPN MS24630-33Tapping Screw
- 5305-00-058-2897 MPN NAS601-26PMachine Screw
- 5305-00-104-5081 MPN NAS1352-7LE48PSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-586-1952 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1124V19 | National Aerospace Standards |