NSN 5305-01-586-1960
High Torque Screw
Between 2.239 inches and 2.269 inches fastener length, flat chamfer head style, between 0.365 inches and 0.375 inches head diameter, head height: between 0.133 inches and 0.150 inches .
Manufacturer part number NAS1124V31 for national stock number 5305015861960.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-586-1960.
-
MPN or Model
NAS1124V31
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.316 inches -
Fastener Length
Between 2.239 inches and 2.269 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.365 inches and 0.375 inches -
Head Height
Between 0.133 inches and 0.150 inches -
Grip Diameter
Between 0.2481 inches and 0.2487 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 1.928 inches and 1.948 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy uns r56400 -
Material Specification
Ams 4967 assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1124 professional/industrial association standard
More from these suppliers
- 5940-00-725-9498 MPN NAS707RS-2Stud Terminal
- 5940-01-425-7412 MPN NAS1063A4-462Terminal Board Marker Strip
- 5935-01-373-0503 MPN SAE AS 85049AElectrical Connector Retaining Plate
- 5940-01-381-7237 MPN NAS1063B141-155Terminal Board Marker Strip
- 1680-01-662-0933 MPN MS24665-358Cotter Pin A469 Nrp
- 5305-00-021-7468 MPN MS27039-4-46Machine Screw
- 5305-00-052-5924 MPN MS35198-72Machine Screw
- 5305-00-088-9075 MPN MS35190-302Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-586-1960 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1124V31 | National Aerospace Standards |