NSN 5305-01-586-1964
High Torque Screw
Between 1.323 inches and 1.353 inches fastener length, fillister head style, between 0.306 inches and 0.316 inches head diameter, head height: between 0.103 inches and 0.118 inches .
Manufacturer part number NAS1123V17 for national stock number 5305015861964.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-586-1964.
-
MPN or Model
NAS1123V17
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 1.323 inches and 1.353 inches -
Head Style
Fillister -
Head Diameter
Between 0.306 inches and 0.316 inches -
Head Height
Between 0.103 inches and 0.118 inches -
Grip Diameter
Between 0.1881 inches and 0.1887 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy uns r56400 -
Material Specification
Ams 4967 assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1123 professional/industrial association standard
More from these suppliers
- 5940-01-010-1572 MPN NAS1745-16Conductor Splice
- 5305-00-054-9237 MPN MS24694C125Machine Screw
- 5305-00-057-0516 MPN MS51958-19Machine Screw
- 5305-00-114-1907 MPN NAS1352-10LE80PSocket Head Cap Screw
- 5305-00-150-9209 MPN MILS7839Machine Screw
- 5305-00-225-9082 MPN MS90726-27Hexagon Head Cap Screw
- 5305-00-282-0842 MPN NAS220-10Machine Screw
- 5305-00-282-3999 MPN NAS334-16Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-586-1964 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1123V17 | National Aerospace Standards |