NSN 5305-01-586-1978
High Torque Screw
Between 1.699 inches and 1.729 inches fastener length, fillister head style, between 0.306 inches and 0.316 inches head diameter, head height: between 0.103 inches and 0.118 inches .
Manufacturer part number NAS1123V23 for national stock number 5305015861978.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-586-1978.
-
MPN or Model
NAS1123V23
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 1.699 inches and 1.729 inches -
Head Style
Fillister -
Head Diameter
Between 0.306 inches and 0.316 inches -
Head Height
Between 0.103 inches and 0.118 inches -
Grip Diameter
Between 0.1881 inches and 0.1887 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 1.428 inches and 1.448 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy uns r56400 -
Material Specification
Ams 4967 assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1123 professional/industrial association standard
More from these suppliers
- 5940-01-425-6044 MPN NAS1063A5-438Terminal Board Marker Strip
- 5940-01-384-3975 MPN NAS1063B3-3Terminal Board Marker Strip
- 5305-00-007-2962 MPN NAS1743C3T14Socket Head Cap Screw
- 5305-00-008-5879 MPN NAS1191E04P4LHSocket Head Cap Screw
- 5305-00-008-5898 MPN NAS1191-04P4LSocket Head Cap Screw
- 5305-00-021-7336 MPN MS21295-47Socket Head Cap Screw
- 5305-00-045-4832 MPN NAS1352-08H4PSocket Head Cap Screw
- 5305-00-052-6891 MPN MS35198-53Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-586-1978 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1123V23 | National Aerospace Standards |