NSN 5305-01-586-1979
High Torque Screw
Between 1.761 inches and 1.791 inches fastener length, fillister head style, between 0.306 inches and 0.316 inches head diameter, head height: between 0.103 inches and 0.118 inches .
Manufacturer part number NAS1123V24 for national stock number 5305015861979.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-586-1979.
-
MPN or Model
NAS1123V24
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 1.761 inches and 1.791 inches -
Head Style
Fillister -
Head Diameter
Between 0.306 inches and 0.316 inches -
Head Height
Between 0.103 inches and 0.118 inches -
Grip Diameter
Between 0.1881 inches and 0.1887 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 1.490 inches and 1.510 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy uns r56400 -
Material Specification
Ams 4967 assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1123 professional/industrial association standard
More from these suppliers
- 5940-00-110-2994 MPN NAS1745-10Conductor Splice
- 5935-00-838-6814 MPN NAS714-19Electrical Receptacle Connector
- 5935-01-316-9334 MPN MS33688-28-21PElectrical Connector Insert
- 5940-01-357-3664 MPN NAS1063A14-12Terminal Board Marker Strip
- 5940-01-451-2672 MPN NAS1063E3-551UTerminal Board Marker Strip
- 1680-01-479-6212 MPN NAS355-60-910Aircraft Control Tube Assembly
- 5940-01-303-7067 MPN NAS1747-11Conductor Splice
- 5305-00-006-2410 MPN MS51105-412Hexagon Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-586-1979 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1123V24 | National Aerospace Standards |