NSN 5305-01-586-7054
High Torque Screw
0.400 inches fastener length, flat countersunk head style, between 0.211 inches and 0.279 inches head diameter, locking feature: patch locking feature.
Manufacturer part number NAS1161-1B for national stock number 5305015867054.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-586-7054.
-
MPN or Model
NAS1161-1B
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.338 inches -
Fastener Length
0.400 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.211 inches and 0.279 inches -
Locking Feature
Patch locking feature -
Grip Diameter
Between 0.136 inches and 0.137 inches -
Internal Drive Style
Torque-set ribbed -
End Application
B-1b aircraft -
Thread Diameter
0.138 inches -
Grip Length
0.062 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
100.0 degrees -
Material
Steel comp 4140 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 type ii, class 2 federal specification single treatment response -
Thread Series Designator
Unjc
More from these suppliers
- 5975-00-054-9372 MPN NAS1668-2Plug
- 5305-00-007-6178 MPN NAS1100E02-13Machine Screw
- 5305-00-008-5914 MPN NAS1100C06-28Machine Screw
- 5305-00-053-1094 MPN MS35199-83Machine Screw
- 5305-00-071-2097 MPN MS51958-85Machine Screw
- 5305-00-097-4441 MPN MS21125-419Close Tolerance Screw
- 5305-00-126-6148 MPN NAS603-31PMachine Screw
- 5305-00-205-3674 MPN NAS1189CE06P4Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-586-7054 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1161-1B | National Aerospace Standards |