NSN 5305-01-587-7156
High Torque Screw
Between 1.916 inches and 1.946 inches fastener length, pan no. 2 head style, between 0.477 inches and 0.492 inches head diameter, head height: between 0.140 inches and 0.150 inches .
Manufacturer part number NAS1578A4T18 for national stock number 5305015877156.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-587-7156.
-
MPN or Model
NAS1578A4T18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.403 inches -
Fastener Length
Between 1.916 inches and 1.946 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.477 inches and 0.492 inches -
Head Height
Between 0.140 inches and 0.150 inches -
Grip Diameter
Between 0.248 inches and 0.249 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
1.528 inches -
Thready Qty Per Inch (tpi)
28 -
Material
Steel comp 4140 or steel comp 4340 -
Material Specification
Mil-a-5626 military specification 1st material response or ams 6415 e4340 assn standard 2nd material response -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-425-6514 MPN NAS1063A5-447Terminal Board Marker Strip
- 5940-01-615-1039 MPN NAS1063C10-210LTerminal Board Marker Strip
- 5935-00-959-6481 MPN NAS715-23BElectrical Receptacle Connector
- 5305-00-007-6187 MPN NAS1100E08-32Machine Screw
- 5305-00-019-9467 MPN NAS1351-3LN6Socket Head Cap Screw
- 5305-00-052-1560 MPN AN525D8R10Socket Head Cap Screw
- 5305-00-052-8236 MPN MS51861-52Tapping Screw
- 5305-00-059-8346 MPN MS35215-16Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-587-7156 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1578A4T18 | National Aerospace Standards |