NSN 5305-01-588-1747
High Torque Screw
1.969 inches fastener length, fillister countersunk head style, between 0.3898 inches and 0.3948 inches head diameter, head height: 0.015 inches .
Manufacturer part number HT4027-4-24 for national stock number 5305015881747.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-588-1747.
-
MPN or Model
HT4027-4-24
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
1.969 inches -
Head Style
Fillister countersunk -
Head Diameter
Between 0.3898 inches and 0.3948 inches -
Head Height
0.015 inches -
Grip Diameter
0.25 inches -
Internal Drive Style
High-torque -
End Application
Aircraft; f-15 -
Thread Diameter
0.2500 inches -
Grip Length
1.5 inches -
Thready Qty Per Inch (tpi)
28.0 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Nickel alloy 718 -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-014-8448 MPN NAS1101V3-8Machine Screw
- 5305-01-054-6288 MPN AIC984-3-10Close Tolerance Screw
- 5305-01-055-1146 MPN BACB30LU6-11Close Tolerance Screw
- 5305-01-385-9817 MPN AIC1652-4-5AClose Tolerance Screw
- 5305-01-417-2497 MPN TX1027D4-16AClose Tolerance Screw
- 5305-01-462-1653 MPN AIC9535-8-11Close Tolerance Screw
- 5305-01-462-2728 MPN TX1024D4-14-6AClose Tolerance Screw
- 5305-01-508-3845 MPN TX1026C6-10AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-588-1747 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4027-4-24 | Sps Technologies, Llc |
HT4027-4-24 | Arconic Global Fasteners & Rings, |
HT4027-4-24 | Huck International, Inc. |
ST3M557-4-24 | Boeing Company, The |