NSN 5305-01-588-3876
High Torque Screw
2.238 inches fastener length, flat countersunk head style, 0.258 inches head diameter, grip diameter: 0.189 inches .
Manufacturer part number NAS1581C3T30 for national stock number 5305015883876.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-588-3876.
-
MPN or Model
NAS1581C3T30
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
2.238 inches -
Head Style
Flat countersunk -
Head Diameter
0.258 inches -
Grip Diameter
0.189 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
1.875 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
2000 pounds per square inch -
Countersink Angle
100.0 degrees -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Passivate -
Surface Treatment Specification
Ams2700, method 1, type 2 or type 8, class 1 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-425-6043 MPN NAS1063A5-439Terminal Board Marker Strip
- 1680-01-546-1239 MPN NAS1711D15-76TWebbing Strap
- 5935-00-111-1890 MPN NAS1665-10Electrical Connector Backshell
- 5305-00-004-3129 MPN NAS1190E04P15LSocket Head Cap Screw
- 5305-00-057-0919 MPN NAS1219-04-6Machine Screw
- 5305-00-058-2067 MPN MS24677-7Socket Head Cap Screw
- 5305-00-068-0520 MPN MS35190-313Machine Screw
- 5305-00-127-0191 MPN MS27039DD0828Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-588-3876 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581C3T30 | National Aerospace Standards |
Stock Check
- NE: 232
- NS: 1