NSN 5305-01-588-7482
High Torque Screw
1.281 inches fastener length, flat countersunk head style, 0.477 inches head diameter, grip diameter: 0.312 inches .
Manufacturer part number HT4027-5-12 for national stock number 5305015887482.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-588-7482.
-
MPN or Model
HT4027-5-12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.531 inches -
Fastener Length
1.281 inches -
Head Style
Flat countersunk -
Head Diameter
0.477 inches -
Grip Diameter
0.312 inches -
Internal Drive Style
High-torque -
End Application
F-15 aircraft -
Thread Diameter
0.312 inches -
Grip Length
0.750 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
100.0 degrees -
Material
Stainless steel -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-082-1897 MPN 3MA509-10R9Machine Screw
- 5305-00-127-7510 MPN HR112-5-11Close Tolerance Screw
- 5305-00-316-7805 MPN 965812-211CMachine Screw
- 5305-00-450-5976 MPN AIC1023V4-10Close Tolerance Screw
- 5305-00-508-7710 MPN AIC84C3-5Machine Screw
- 5305-01-004-9497 MPN AIC813-06R16Machine Screw
- 5305-01-050-9003 MPN AIC984-5-14Close Tolerance Screw
- 5305-01-054-6260 MPN AIC985-3-5Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-588-7482 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4027-5-12 | Huck International, Inc. |
ST3M557-5-12 | Boeing Company, The |
HT4027-5-12 | Sps Technologies, Llc |
HT4027-5-12 | Arconic Global Fasteners & Rings, |
11923-5-12 | Reid Products Inc. |