NSN 5305-01-589-0674
High Torque Screw
Non-bearing head surface coated w/light blue kykem, color number 15526 per fed-std-595.
Manufacturer part number HT4027-6 for national stock number 5305015890674.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-589-0674.
-
MPN or Model
HT4027-6
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.626 inches and 0.656 inches -
Fastener Length
0.641 inches -
Head Style
Flat countersunk undercut -
Head Diameter
0.564 inches -
Head Height
0.081 inches -
Grip Diameter
0.374 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.373 inches -
Grip Length
0.375 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Nickel alloy 718 -
Material Specification
Ams5662 assn standard all material responses -
Surface Treatment
Passivate -
Surface Treatment Specification
Ams 2700 method 1 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-005-8299 MPN 51B223-15Close Tolerance Screw
- 5305-00-310-5246 MPN 965811-211CSocket Head Cap Screw
- 5305-00-492-8744 MPN NAS1101-06-7BMachine Screw
- 5305-00-915-4768 MPN AIC792-4-6Machine Screw
- 5305-00-954-3914 MPN AIC811-7-16Socket Head Cap Screw
- 5305-01-004-9495 MPN AIC812-02-10Machine Screw
- 5305-01-144-6262 MPN NAS1101-06-60Machine Screw
- 5305-01-158-5373 MPN 3M893-5-6Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-589-0674 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4027-6 | Sps Technologies, Llc |
ST3M557-6-6 | Boeing Company, The |
W04027-6-6 | West Coast Aerospace Inc |