NSN 5305-01-589-1225
High Torque Screw
1.156 inches fastener length, flat countersunk head style, between 0.389 inches and 0.395 inches head diameter, grip diameter: 0.249 inches .
Manufacturer part number HT4027-4-11M for national stock number 5305015891225.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-589-1225.
-
MPN or Model
HT4027-4-11M
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
1.156 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.389 inches and 0.395 inches -
Grip Diameter
0.249 inches -
Internal Drive Style
Torque -
End Application
F-15 aircraft -
Thread Diameter
0.250 inches -
Grip Length
0.687 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
100.0 degrees -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-068-5402 MPN AIC811-00-3Socket Head Cap Screw
- 5305-00-316-7484 MPN AIC812-02-2Machine Screw
- 5305-01-206-7205 MPN BACS12CK3U18Machine Screw
- 5305-01-207-0223 MPN BACB30LL3U2Close Tolerance Screw
- 5305-01-284-2488 MPN BACB30MS8S12Close Tolerance Screw
- 5305-01-288-9156 MPN AIC9535-7-25Close Tolerance Screw
- 5305-01-336-4390 MPN AIC984-4-4Close Tolerance Screw
- 5305-01-435-6482 MPN BACB30LU9-24Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-589-1225 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4027-4-11M | Arconic Global Fasteners & Rings, |
ST3M557-4-11M | Boeing Company, The |
HT4027-4-11M | Sps Technologies, Llc |
HT4027-4-11M | Huck International, Inc. |
11923-4-11M | Reid Products Inc. |