NSN 5305-01-589-8090
High Torque Screw
Between 0.972 inches and 1.002 inches fastener length, flat countersunk head style, between 0.456 inches and 0.508 inches head diameter, grip diameter: between 0.249 inches and 0.250 inches .
Manufacturer part number NAS7204U9 for national stock number 5305015898090.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-589-8090.
-
MPN or Model
NAS7204U9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.241 inches and 0.244 inches -
Fastener Length
Between 0.972 inches and 1.002 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.456 inches and 0.508 inches -
Grip Diameter
Between 0.249 inches and 0.250 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Bolt 100 degrees head, cruciform recess, close tolerance, a286 cres, long thread, self-locking and nonlocking -
Material
Iron alloy 660 -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-939-9126 MPN 25-4LTrunnion Tank Strap
- 5940-01-439-8104 MPN NAS1388-5Conductor Splice
- 5940-01-470-3345 MPN NAS1063A6-510BLTerminal Board Marker Strip
- 5305-00-043-3643 MPN MS51964-38Setscrew
- 5305-00-051-6843 MPN MS27039-0822Machine Screw
- 5305-00-051-8308 MPN MS24693-S40Machine Screw
- 5305-00-068-0502 MPN NASM90725Hexagon Head Cap Screw
- 5305-00-139-6753 MPN MS3213-29Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-589-8090 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7204U9 | National Aerospace Standards |