NSN 5305-01-591-1380
High Torque Screw
1.838 inches fastener length, flat fillister head style, between 0.265 inches and 0.270 inches head diameter, head height: between 0.088 inches and 0.102 inches .
Manufacturer part number NAS1122-25 for national stock number 5305015911380.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-591-1380.
-
MPN or Model
NAS1122-25
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
1.838 inches -
Head Style
Flat fillister -
Head Diameter
Between 0.265 inches and 0.270 inches -
Head Height
Between 0.088 inches and 0.102 inches -
Grip Diameter
0.255 mils -
Point Diameter
Between 0.1625 inches and 0.1635 inches -
Point Style
Flat -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.164 inches -
Grip Length
1.562 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
2240 pounds per square inch -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification single material response or mil-s-5000 military specification single material response or mil-s-6049 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii, class 2 federal specification single treatment response -
Thread Series Designator
Unjc
More from these suppliers
- 5905-01-604-0709 MPN 4610X-101-154LFFilm Fixed Resistor Network
- 5305-00-009-9207 MPN NAS1096-3-23Hexagon Head Cap Screw
- 5305-00-061-8427 MPN NAS1081-5B12Setscrew
- 5305-00-078-9643 MPN MS27039-1-34Machine Screw
- 5305-00-081-2651 MPN MS51038-15Setscrew
- 5305-00-088-9671 MPN NAS560CK2P5Machine Screw
- 5305-00-115-9995 MPN MS24671-85Socket Head Cap Screw
- 5305-00-127-7511 MPN NAS604-5PMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-591-1380 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1122-25 | National Aerospace Standards |