NSN 5305-01-596-2335
High Torque Screw
Between 0.433 inches and 0.463 inches fastener length, flat countersunk head style, between 0.226 inches and 0.257 inches head diameter, grip diameter: between 0.163 inches and 0.164 inches .
Manufacturer part number NAS8802-2 for national stock number 5305015962335.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-596-2335.
-
MPN or Model
NAS8802-2
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
Between 0.433 inches and 0.463 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.226 inches and 0.257 inches -
Grip Diameter
Between 0.163 inches and 0.164 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.164 inches -
Grip Length
Between 0.115 inches and 0.135 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Titanium alloy uns r56440 -
Thread Series Designator
Unjc
More from these suppliers
- 5935-01-355-3702 MPN AS34061Electrical Plug Connector
- 5305-00-008-7855 MPN NAS1100C04-22PMachine Screw
- 5305-00-052-8907 MPN MS24630-61Tapping Screw
- 5305-00-054-9252 MPN MS51045-30Setscrew
- 5305-00-088-3819 MPN NAS1631-12Machine Screw
- 5305-00-150-3485 MPN MS16995-9BSocket Head Cap Screw
- 5305-00-150-3535 MPN NAS1635-06LE5PSocket Head Cap Screw
- 5305-00-150-3543 MPN NAS662C3R5Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-596-2335 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS8802-2 | National Aerospace Standards |