NSN 5305-01-597-4109
High Torque Screw
1.583 inches fastener length, flat countersunk head style, between 0.575 inches and 0.625 inches head diameter, single shear strength: 95000 pounds per square inch.
Manufacturer part number NAS4405-18 for national stock number 5305015974109.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-597-4109.
-
MPN or Model
NAS4405-18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Direction
Right-hand -
Thread Length
0.438 inches -
Fastener Length
1.583 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.575 inches and 0.625 inches -
Single Shear Strength
95000 pounds per square inch -
Internal Drive Style
Tri-wing recess -
Thread Diameter
0.312 inches -
Thready Qty Per Inch (tpi)
24 -
Minimum Yield Strength
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Bolt, 100 deg. Head, tri-slot recess, close tolerance, alloy steel, short thread, self-locking and nonlocking -
Material
Steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, ty2, cl2 federal specification 1st treatment response -
Thread Series Designator
Unc -
Specification Data
80205-nas4400 through 4416 professional/industrial association standard
More from these suppliers
- 5940-01-630-1917 MPN NAS14941Lug Terminal
- 5305-00-052-6875 MPN MS24627-51Tapping Screw
- 5305-00-052-6983 MPN MS27039C4-11Machine Screw
- 5305-00-053-1332 MPN NAS1191C4P6LSocket Head Cap Screw
- 5305-00-058-4101 MPN NAS608C3H8Socket Head Cap Screw
- 5305-00-069-5581 MPN MS90725-97Hexagon Head Cap Screw
- 5305-00-104-5075 MPN NAS1352-5LE52PSocket Head Cap Screw
- 5305-00-125-5707 MPN NAS1352C01-2Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-597-4109 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS4405-18 | National Aerospace Standards |
NAS4405-18 | Lockheed Martin Corporation |