NSN 5305-01-599-5426
High Torque Screw
1.214 inches fastener length, fillister head style, 0.310 inches head diameter, head height: 0.109 inches .
Manufacturer part number PMT1123-15 for national stock number 5305015995426.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-599-5426.
-
MPN or Model
PMT1123-15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
1.214 inches -
Head Style
Fillister -
Head Diameter
0.310 inches -
Head Height
0.109 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
C-5 aircraft -
Thread Diameter
0.189 inches -
Thready Qty Per Inch (tpi)
32 -
Part Name Assigned By Controlling Agency
Mortorq, spiral drive, screw machine-flat fillister head, close tol. Short thread -
Material
Steel comp 4140 -
Material Specification
Mil-s-5626 military specification single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-511-6975 MPN 3M1170D3-15AClose Tolerance Screw
- 5306-00-516-5998 MPN VEP220555-8-23Machine Bolt
- 5306-00-900-2522 MPN MS21250-06066Shear Bolt
- 5306-00-958-9202 MPN MS21250-04018Shear Bolt
- 5306-01-023-2975 MPN ST3M571-4-22Shear Bolt
- 5306-01-043-5715 MPN GB511CE5-6Shear Bolt
- 5306-01-045-9520 MPN VAL23033-4X18Shoulder Bolt
- 5306-01-054-3423 MPN C7521L6-20Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-599-5426 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PMT1123-15 | Valley-todeco, Inc. |
PMT1123-15 | Phillips Screw Co |
PMT1123-15 | Sps Technologies, Llc |
PMT1123-15 | Arconic Global Fasteners & Rings, |
PMT1123-15 | Sps Technologies, Llc |
PMT1123-15 | Sps Technologies, Llc |
PMT1123-15 | John Hassall, Inc. |
PMT1123-15 | Huck International, Inc. |